Ready to watch some tv, Starting up the x46 lcd hdtv, If you’ve connected antenna or cable to the tv – Sceptre Technologies X46 User Manual
Page 24
- 24 -
www.SCEPTRE.com
SCEPTRE X46 HDTV User Manual
Ready to Watch Some TV?
Starting up the X46 LCD HDTV
1.
Make sure your power cable is connected and the standby red light in the
front of the TV is lit up.
2.
Check all your connection cables off the side or the back of your TV and also
your AV devices. Make sure they are all connected securely.
3.
Turn on your TV and other AV devices if necessary.
4.
Select the correct source according to the Connecting pages.
If You’ve Connected Antenna or Cable to the TV…
If an antenna or cable (without a cable box) is connected to your TV’s tuner, you will
need to go through an INITIAL SETUP process in order to watch the TV. When you
turn on the TV for the first time, the INITIAL SETUP screen will come up. Follow through
the instructions to complete the setup and your TV will be ready for viewing.
1.
Press ENTER to start the setup.
2. Use
the
▲▼
buttons to select your language and press
↵.