Advanced level menu parameters, All level menu parameters – Sony STR-DA5000ES User Manual

Page 46

Advertising
background image

46

GB

• OFF

The virtual speakers are not created.

x

A.F.D. 2CH SW

(Creating, low frequency signals)

• CREATE

Lets you create low frequency signals for output to
the subwoofer when “A.F.D. AUTO” is selected.

• OFF

Low frequency signals are not created.

Advanced LEVEL menu
parameters

When “MENU EXPAND” is set to “ON”, all of
the following parameters are displayed and
adjustable.
See page 40 for the LEVEL menu adjustments.
Initial settings are underlined.

All LEVEL menu parameters

a)

Adjustable only when “MENU EXPAND” is set to
“ON”.

b)

When surround back speaker is set to “SINGLE” or
“YES” (page 20).

c)

When surround back speaker is set to “DUAL”
(except for STR-DA3000ES models of area code
CEL, TW) (page 20).

x

PHASE NOISE (Phase noise)

Initial setting: OFF

Lets you output the test tone sequentially from adjacent
speakers.

x

PHASE AUDIO (Phase audio)

Initial setting: OFF

Lets you output the front 2 channel source sound
(instead of the test tone) sequentially from adjacent
speakers.

x

D.RANGE COMP.

(Dynamic range compressor)

Lets you compress the dynamic range of the sound
track. This may be useful when you want to watch
movies at low volumes late at night.

• OFF

The dynamic range is not compressed.

• STD

The dynamic range is compressed as intended by the
recording engineer.

• MAX

The dynamic range is compressed dramatically.

Tip

Dynamic range compressor lets you compress the
dynamic range of the soundtrack based on the dynamic
range information included in the Dolby Digital signal.
“STD” is the standard setting, but it only enacts light
compression.

Therefore, we recommend using the “MAX” setting.
This greatly compresses the dynamic range and lets
you view movies late at night at low volumes. Unlike
analog limiters, the levels are predetermined and
provide a very natural compression.

Note

Dynamic range compression is possible with Dolby
Digital sources only.

TEST TONE

PHASE NOISE

a)

PHASE AUDIO

a)

FRONT L_I_R

CENTER XXX.X dB

SURROUND L XXX.X dB

SURROUND R XXX.X dB

SURR BACK XXX.X dB

b)

SURR BACK L XXX.X dB

c)

SURR BACK R XXX.X dB

c)

SUB WOOFER XXX.X dB

MULTI CH 1 SW XXX dB

MULTI CH 2 SW XXX dB

D.RANGE COMP.

a)

Advertising
This manual is related to the following products: