Southbend HDG-60E - Manual (Page 3)

H
EAVY
D
UTY
C
OUNTERLINE
T
ABLE OF
C
ONTENTS
Congratulations! You have purchased one of the finest pieces of commercial cooking equipment on the
market.
You will find that your new equipment, like all Southbend equipment, has been designed and manufactured
to meet the toughest standards in the industry. Each piece of Southbend equipment is carefully engineered
and designs are verified through laboratory tests and field installations. With proper care and field
maintenance, you will experience years of reliable, trouble-free operation. For best results, read this
manual carefully.
RETAIN THIS MANUAL FOR FUTURE REFERENCE.
Table of Contents
Specifications ......................................................................................................................... 4
Installation .............................................................................................................................. 9
Operation.............................................................................................................................. 21
Cleaning ............................................................................................................................... 25
Adjustments.......................................................................................................................... 27
Troubleshooting.................................................................................................................... 31
Parts ..................................................................................................................................... 32
Read these instructions carefully before attempting installation. Installation and initial startup should be
performed by a qualified installer. Unless the installation instructions for this product are followed by a
qualified service technician (a person experienced in and knowledgeable with the installation of commercial
gas an/or electric cooking equipment) then the terms and conditions on the Manufacturer’s Limited
Warranty will be rendered void and no warranty of any kind shall apply.
In the event you have questions concerning the installation, use, care, or service of the product, write to:
Southbend
1100 Old Honeycutt Road
Fuquay-Varina, North Carolina 27526 USA
The serial plate is located on the interior side of the valve panel, as shown below:
Figure 1
Charbroiler Models Griddle Models Open Top Models
Serial plate of each model is located on the interior side the valve panel.
O PERATOR ’ S M ANUAL 1182845 REV 6 P AGE 3