Siemens Hicom cordless EM - Manual (Page 45)

45
Main menu – functions
If your mobile unit is logged onto more than one base
(DECT systems*), you can set it to a particular base or
"best base" (automatic base changeover).
Setting the base

Press the menu key.
Scroll to
?!'!  -!
and confirm.
e.g.
If necessary, scroll to the required
base.
Press the display key.
Scroll to
<, *, 2?!'! N
or

 1! ?!'!  *)
and confirm.

or Return to the higher-level display.
Activating priority selection
If you have set the mobile unit permanently to a base, you
can also activate
<, *, 2?!'! 
.
When
<, *, 2?!'! N
is activated - indicated by
O
,
e.g.
O -!
– the mobile unit searches for the default base
for 30 seconds after switching it on or leaving the radio
range. If this base is not found, the mobile unit automatically
searches for another base.
Setting the base
* see also Note on page 20
<
?!'!  -!
9
<
 -!
9
<
9
[
Note:
● If you set
!- -!
, the mobile unit is always auto-
matically linked to the base with the best reception.
● If you are located between two systems and the
mobile unit switches continuously, you should set it to
a particular system.