Remove battery cover, Insert sim card, Remove battery cover insert sim card – Siemens GSM 900 User Manual

Page 16: D (p. 11), Getting started

Advertising
background image

31.5.02

06-S46 Body.fm i 37 Eagle Am Engl, A31008-H4500-A1-4-7619

11

Getting Started

Remove battery cover

• Unlock battery cover

and

remove

.

Insert SIM card

Your service provider has supplied
you with a SIM card for your phone.
The SIM card is required for the
phone to operate in TDMA or GSM,
and it contains important data for
your GSM subscription.

If you have received your phone’s
SIM card in credit card size, snap the
smaller piece out and remove any
rough edges.

• Slide out the red SIM holder

and turn it in the direction
indicated by the arrow

.

• Insert SIM card in the holder

.

Make sure the angled corner is in
the correct position and the
contacts are facing upward.

• Turn holder until the SIM card and

contacts face the phone

.

• Slide the SIM holder back into the

phone until it clicks into place

.

Security/PIN
The SIM card can be protected against

misuse with a 4 - 8 digit PIN (personal

identification number). Depending on the

type of SIM card, the PIN may be changed

or the protection may be activated or

deactivated (p. 77).

Type of SIM card
Only 3-Volt SIM cards may be used. Older

SIM cards (5-Volt technology) are not

supported. Please contact your service

provider if you have an older card.

Advertising
This manual is related to the following products: