Insert battery, Charge battery, Insert battery charge battery – Siemens GSM 900 User Manual

Page 17: P. 12), Getting started

Advertising
background image

31.5.02 06-S46 Body.fm i 37 Eagle Am Engl, A31008-H4500-A1-4-7619

12

Getting Started

Insert battery

• Insert battery into the phone

(

and

).

• Replace battery cover and push

gently in the direction of the
arrow

until it clicks.

Charge battery

The battery is not fully charged
when delivered. To charge your
phone’s battery:
• Plug the supplied charger into the

device interface at the bottom of
the phone and plug the power
supply into the outlet. (Use only
the charger supplied with your
phone and charge for at least
two hours).

• After charging, disconnect the

charger from the phone by
squeezing the top and bottom of
the charger cable and pulling it out
of your phone.

Charging
Your phone’s display shows the following:

s

When charging is in progress.

r

When charging is complete.

An empty battery is fully charged after

approximately two hours. Charging is only

possible when the temperature is between

41°F and 104°F (5°C and 40°C). (The

charge icon flashes as a warning when the

temperature is above or below the stated

values.) The voltage specified on the power

supply unit must not be exceeded.

Advertising
This manual is related to the following products: