Siemens GSM 900 - Manual (Page 75)

31.5.02 06-S46 Body.fm i 37 Eagle Am Engl, A31008-H4500-A1-4-7619
70
Fast Access Keys
Speed dialing keys
Digit keys 2 through 8 may be set to
speed dial important or frequently
called numbers. For available key
assignment see page 69.
Set-up/Change
In standby mode:
J
Press and hold digit key
(2-8).
If the key is not already assigned,
the
Hotkey
menu will appear.
…
Scroll to select a function
or
Phone number .
Select
Select soft key to assign
Hotkey action.
(If you select
Phone
number , you will be taken
to the address book to
select a number.)
To change the action for an already
assigned Hotkey.
J
Press number.
§[action]§ Select soft key to select
assigned function.
§Change Select soft key to
reassign Hotkey.
The following keys are reserved:
1
= Voice mailbox (p. 41).
:
= Emergency calls (p. 4) (only if an
emergency number is set).
Clear speed dialing key
To clear a speed dialing key, press
the key, then select the feature that
is currently programmed (shown on
the right soft key).
§Change§ Select soft key.
…
Scroll to the “Empty”
selection.
§Select§ Select soft key.
Apply
To select a stored phone number or
start a stored application:
In standby mode:
J
Press digit key.
The assignment of digit key is
displayed instead of the standard
right soft key. Select and hold soft
key to launch function or place
phone call.
Shortcut:
J
Press and hold desired
digit key to begin action.
Emergency call
The red
:
key is reserved for an
emergency number (i.e. 911, the
Police Department, the Fire
Department). This number has not
been preset, therefore you must
assign this number. To assign an
emergency number for the red
:
key: