User instructions – Smeg DWD1E User Manual
Page 9
User instructions
34
POWER SWITCH-ON (T
YPE
"A")
In order to switch on the appliance just turn the ON/OFF selector (2) till it corresponds with the letter I.
POWER SWITCH-ON (T
YPE
"B")
To switch on the dishwasher press the ON/OFF button (3) to start the program. The PILOT light (4)
will come on.
T
YPE
"A"
T
YPE
"B"
TABLE FOR CERTIFICATION BODIES
Reference standard
EN 50242
Reference program
(*) Selector on P6 + ECO DRYING
Load
12 place-settings
Type of detergent
B
Amount of detergent
30 g
Rinse aid setting
Depending on the model 3/4 or 4/6
EN 50242
DISABLING THE END OF CYCLE ACOUSTIC DEVICE
It is possible to disable the sounding of the start/end of cycle acoustic device.
Proceed as follows:
•
press down the HALF LOAD (6) button for a few seconds until the symbol bS appears on the
INFORMATION DISPLAY (8);
•
press the HALF LOAD (6) button again to disable the acoustic device (the symbol bN appears
on the display);
•
press the START/STOP (5) button twice to exit the set-up mode.