Sennheiser EM 2000 - Manual (Page 18)

Using the operating menu
16
Using the operating menu
The buttons
Overview of the operating menu
When one of the standard displays is shown on the display panel, you can get into the main
menu by pressing the jog dial. The extended menu “
Advanced Menu ” and the other menus
can be accessed via the corresponding menu items.
Button Function of the button
Press the STANDBY
button • Switches the receiver on and off
• Cancels the entry and returns to the current standard display
(ESC function)
• Mutes the receiver (special function, see page 15)
Press the jog dial • Changes from the current standard display to the operating
menu
• Calls up a menu item
• Enters a submenu
• Stores the settings and returns to the operating menu
Turn the jog dial • Selects a standard display (see page 15)
• Changes to the next/previous menu item
• Changes the setting of a menu item
Squelch
Easy Setup
Frequency Preset
Name
AF Out
Equalizer
AutoLock
Advanced
Exit
Main menu
“Menu”
AF-Peak
Low RF Signal
RF Mute
TX Mute
RX Mute
Low Battery
Exit
“Warnings”
Reset List
Current List
Scan New List
Exit
“Easy Setup”
Tune
Guitar Tuner
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Extended menu
“Advanced Menu”
SK Settings
SKM Settings
SKP Settings
Exit
Submenu
“Sync Settings”
Sensitivity
Low Cut ( nur SKM)
Auto Lock
Mute Mode (nur SK, SKP)
RF Power
PhantomPower48V (nur SKP)
Cable Emulation (nur SK)
Exit
“SK Settings”, “SKM
Settings”, “SKP Settings”