Uick reference to using the vcr – Sony SLV-AV100C User Manual
Page 104
Additional Information
104
uick reference to using the VCR
Q
Sony Corporation
Printed in Japan
To record a program
1
Press VCR Plus+ on the remote
commander.
2
Enter the program’s PlusCode
number.
3
Select ONCE, DAILY, or WEEKLY in
the VCR Plus menu.
4
Insert a tape.
5
Press POWER to turn off the VCR.
To watch TV
1
Turn off your VCR, or press the VCR’s
TV/VTR button until the VTR
indicator in the display window goes
off.
2
Select the channel with your cable box
(if you have one) or with your TV.
Hookup 3
To play a tape
1
Set the TV to channel 3 or 4 (or to
video input, if you made V
connection.)
2
Insert a tape and press · PLAY. If
there’s no picture on your TV, press
the VCR’s TV/VTR button until the
VTR indicator comes on in the display
window.
To record a program
1
Press VCR Plus+ on the remote
commander.
2
Enter the program’s PlusCode
number.
3
Select ONCE, DAILY, or WEEKLY in
the VCR Plus menu.
4
Insert a tape.
5
Press POWER to turn off the VCR.
To watch TV
1
Turn off the VCR, or press the VCR’s
TV/VTR button until the VTR
indicator in the display window goes
off.
2
Set the TV to the channel you want to
watch.
Hookup 1
To play a tape
1
Set the TV to channel 3 or 4 (or to
video input, if you made V
connection.)
2
Insert a tape and press PLAY.
To record a program
1
Turn on the cable box.
2
Press VCR Plus+ on the remote
commander.
3
Enter the program’s PlusCode
number.
4
Select ONCE, DAILY, or WEEKLY in
the VCR Plus menu.
5
Insert a tape.
6
Press POWER to turn off the VCR.
7
Leave the cable box on.
To watch TV
1
Turn off your VCR, or press the VCR’s
TV/VTR button until the VTR
indicator in the display window goes
off.
2
Turn on your cable box.
3
Set the TV to the cable box output
channel (usually 2, 3, or 4).
4
Set the cable box to the channel you
want to watch.
Hookup 2
To play a tape
1
If you made V connection, set the TV
to video input.
If you didn’t use V hookup:
• Turn on the cable box.
• Set the cable box to channel 3 or 4.
• Set the TV to the output channel of the
cable box (usually 2, 3 or 4).
2
Insert a tape and press · PLAY.
If you have any questions about this product, you may call: Sony Customer
Information Center
1-800-222-SONY (7669) or write to: Sony Customer Information
Center
Sony Drive, Mail Drop #T1-11, Park Ridge, NJ 07656
Hookup 4
To play a tape
1
Set the TV to channel 3 or 4 (or to
video input, if you madeV
connection.)
2
Insert a tape and press · PLAY.
To record a program
1
Turn on the cable box.
2
Set the cable box to the channel you
want to record.
3
Press VCR Plus+ on the remote
commander.
4
Enter the program’s PlusCode
number.
5
Select ONCE, DAILY, or WEEKLY in
the VCR Plus menu.
6
Insert a tape.
7
Press POWER to turn off the VCR.
8
Leave the cable box on.
To watch TV
1
Turn off your VCR, or press the VCR’s
TV/VTR button until the VTR
indicator in the display window goes
off.
2
Turn on your cable box.
3
Set the TV to the cable box output
channel (usually 2, 3, or 4).
4
Set the cable box to the channel you
want to watch.