Using av preset – Sony KL-40WA1 User Manual
Page 25
25
GB
Using AV Preset
Using this function you can preset the desired input source (e.g.
1, RGB signal) to the respective AV input (AV 1
). In this
way, a connected VCR will automatically switch to the RGB signal.
1
Press MENU.
2
Push the joystick to blue or green to select the symbol
on the
menu screen. Push to yellow to confirm.
3
Push to blue or green to select “Installation”. Push to yellow. Push
to blue or green to select “AV Preset”. Push to yellow to confirm.
The AV PRESET menu appears.
4
Push to blue or green to select the desired AV input. Push to
yellow to confirm.
5
Push to blue or green to select the desired source. Push to yellow
to confirm. For the respective AV inputs you have the following
choice:
AV1: RGB or AV
AV3: YC3 or AV
AV2: YC2 or AV
AV4: YC4 or AV
6
To label a source: Push to blue or green to select the first
character (letter or number, “-” for a blank). Push to yellow to
confirm. Select the other four characters in the same way.
7
For automatic format and PAL plus selection (Auto 16:9):
Push to blue or green to select “on” for the AV input.
8
Press the joystick to store.
9
Repeat steps 4 to 8 for other AV inputs.
Checking and selecting the input and output sources
using the menu
You can display the menu to see which input sources are selected
for the TV screen, as well as which output source is selected. You
can also select them on the menu display.
1
Press MENU.
2
Push the joystick to blue or green to select the symbol
on the
menu screen. Push to yellow to confirm.
The VIDEO CONNECTION menu appears.
You can see which source is selected for the TV and for the output.
If you want to select the input and output on this menu, go on to the
next step.
3
Push to blue or green to select “TV screen” (input source for TV-
screen), or “Output” (output source for
:
2/
q
2).
Push to yellow to confirm.
4
Push to blue or green to select the desired source. Press joystick
to store.
For details about each source, see the table on page 24.
5
Repeat steps 3 to 4 to select the source for other inputs or outputs.
6
Press MENU to restore the normal TV picture.
TV screen
[ ]
VIDEO CONNECTION
Output
TV
- - - - -
[ ]
TV
- - - - -
TV
TV
AV PRESET
AV-INPUT
AV1
AV2
AV3
AV4
AV
YC
AV
AV
SOURCE
AV1
YC2
AV3
AV4
LABEL