Swann DVR4-950 - Manual (Page 16)

16 16
Save, Exit or Load Setup Defaults from the
Exit menu.
Press SET to select the highlighted option.
Save & Exit: Use this option to save all settings that have been changed in the
DVR menus. All changes made will be lost if you do not choose this option.
Exit Without Saving: Select to disregard any changes that have been made
and return to camera view.
Load Setup Default: Reset all settings on the DVR to factory defaults.
Exit Menu
Language
With the Language option selected push the SET button to switch between
English and Chinese.
When starting the DVR4-950™ for the first time or starting the DVR after chang-
ing to a new hard drive, the DVR will configure the hard drive for use. Follow the
on screen prompts to configure the hard drive.
IMPORTANT NOTE: If format is chosen all existing data on the hard drive will
be deleted and unrecoverable.
1. After the DVR recognizes the new
hard drive press PLAY to configure for
use.
2. When the hard drive is configured
you will be asked to format or cancel.
Press PLAY to confirm the format.
Starting the DVR With a New Hard Drive