Sony DVP-NC615 - Manual (Page 32)

32
Resuming Playback from
the Point Where You
Stopped the Disc
(Resume
Play/Multi-disc Resume)
The player remembers the point where you
stopped the disc.
Resuming playback for the
current disc (Resume Play)
The player remembers the point where you
stopped the disc even if the player enters
standby mode by pressing [/1.
1
While playing a disc, press x to
stop playback.
“RESUME” appears on the front panel
display.
2
Press H.
The player starts playback from the point
where you stopped the disc in Step 1.
z Hint
To play from the beginning of the disc, press x
twice, then press H.
Notes
• The point where you stopped playing is cleared
when:
– you change the play mode.
– you do Programme Play or Shuffle Play
– you change the settings on the Setup Display.
• When playing a CD, the point where you stopped
is cleared when the disc tray is opened or the
mains lead is disconnected.
• When playing a DATA CD, the point where you
stopped playing is cleared when the player enters
standby mode, the disc tray is opened, or the
mains lead is disconnected.
• This function may not work with some discs.
Storing the point where you
stopped the disc (Multi-disc
Resume)
The player stores the point where you stopped
the disc and resumes playback from the same
point the next time you insert the same disc.
The player remembers the stopped point of
the disc even after you play other discs in the
disc tray.
Resume playback points for up to 6 different
DVD/VIDEO discs remain in memory even if
you disconnect the mains lead. When you
store a resume playback point for the 7th disc,
the resume playback point for the first disc is
deleted.
z Hints
• To play from the beginning of the disc, press x
twice, then press H.
• To turn off the Multi-disc Resume function, set
“MULTI-DISC RESUME” in “CUSTOM
SETUP” to “OFF” (page 64). Playback restarts at
the resume point only for the current disc in the
player.
Note
This function may not work with some discs.