Sony XBR-65HX929 - Manual (Page 33)

33
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US05OVR.fm
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
Network Setup
Type 1: Secured network with
Wi-Fi Protected Setup (WPS)
The WPS standard makes security of a
wireless home network as straightforward
as pressing the WPS button on the wireless
LAN router. Before setting up a wireless
LAN, check the location of the WPS button
on the router and verify how to use it.
For security purpose, WPS (PIN) provides
a PIN code for your router. PIN code is
renewed every time you select WPS (PIN).
1
Press HOME, then select >
Network > Network Setup.
2
Select Wireless Setup.
3
Select WPS (Push Button) for
Push Button method or WPS (PIN)
for PIN method.
~
• Button name of the WPS may differ
depending on the router (e.g. AOSS
button).
4
Follow the instructions on the setup
screen.
Type 2: Secured network
without Wi-Fi Protected Setup
(WPS)
To set up a wireless LAN, SSID (wireless
network name) and security key (WEP or
WPA key) will be required. If you do not
know them, consult the instruction manual
of your router.
1
Press HOME, then select >
Network > Network Setup.
2
Select Wireless Setup.
3
Select Scan, then select a network
from the list of scanned wireless
networks.
4
Follow the instructions on the setup
screen.
~
• If you use WPS for network setup, the security
settings of the wireless LAN router activate,
and any equipment previously connected to the
wireless LAN in a non-secure status will be
disconnected from the network.
In this case, activate the security settings of the
disconnected equipment and then reconnect.
Or, you can deactivate the security settings of
the wireless LAN router, and then connect the
equipment to a TV in a non-secure status.
Type 3: Unsecured network
with any type of wireless LAN
router
To set up a wireless LAN, SSID (wireless
network name) will be required.
1
Press HOME, then select >
Network > Network Setup.
2
Select Wireless Setup.
3
Select Scan, then select a network
from the list of scanned wireless
networks.
4
Follow the instructions on the setup
screen.
~
• Security key (WEP or WPA key) will not be
required because you do not need to select any
security method in this procedure.
(Continued)