Sound Performance Lab Model 2601 - Manual (Page 16)

16
Transducer
Setup 1
This is the simplest setup for recording situations. The guitar amp is connected normally to
the Transducer. In this case either the Transducer Mic Level Output can be routed to a micro-
phone preamp or its Line Output can connect to an external line in. Both of these outputs may
be used simultaneously.
Setup 2
This is the simplest setup for live applications and when it should be quiet on stage. Connect
the amp to the Transducer. The guitarist receives a monitoring signal (in-ear or through a
monitor box) from the Transducer Line Output through the live mixer.
The PA may also be fed from the mixer or a Transducer output (Line Output, or Mic Level
Output).
Setup Examples
4FUVQ

.JD
1SFBNQ
"%%"8
$POTPMF
1PXFS
*OQVU .JD
-FWFM
0VUQVU -JOF
0VUQVU

.POJUPSJOH
-JOF
0VUQVU

4QFBLFS
0VU
4FUVQ

'0)
.JYFS
1PXFS
*OQVU
.POJUPSJOH 1
"
-JOF
0VUQVU

4QFBLFS
0VU
Recording, Live