Samsung 521 - Manual (Page 20)

20
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those you
have chosen to skip are not displayed.
1 Press the MENU button on the TV set.
◆ Move to “Setup” option by pressing CH ▲ or CH▼ buttons and press
the VOL+ or VOL– buttons.
2 Move to “Channel skip” option by pressing CH ▲ or CH▼ buttons.
◆ To set the Channel skip press the VOL+ or VOL– buttons.
3 Use the CH
▲ or CH▼ buttons to select the channel of your choice.
◆ Add or Erase the desired channel by pressing VOL+ or VOL– button.
◆ At this point, selected channel is displayed on the Sub picture.
4 When you have finished adding and erasing channels, press Menu
repeatedly until the menus disappear.
☛
Programme Number Selection
e.g. To select programme number ‘24’ (two digit).
(When the CHANNEL SELECTION buttons(0~9) are
used.)
e.g. To select programme number ‘7’ (one digit).
◆ Press the DISPLAY button.
◆ The programme number, Colour system, picture mode
and Sound system, and Sound mode, etc are displayed.
ENG
Menu
Picture
Sound
Time
Setup
Function
PinP
Sel. Enter
Setup
Auto store
Manual store
Channel skip
Fine tune
Sort
Sel. Enter
* Channel skip *
P 0 : Erased
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
Sel. Set
Tuning Procedure (Channel skip)
S.STD SURROUND S.MODE
P.STD MENU P.MENU
CH
VOL VOL
SWAP CH SCAN STILL
ROTATE MULTI PinP
ON
11318A#2 8/17/05 12:42 PM Page 20