Convergence adjustment – Samsung 521 User Manual
Page 32
32
ENG
TV
SU
IN
CA
Te
al
T
ad
Te
o
T
Te
T
➝
➝
➝
➝
➝
Red (or Blue)
LIST/FLOF
MIX
INDEX
TV/TEXT
CANCEL
STORE
SUBPAGE
F/T/B
HOLD
PAGE
REVEAL
CONV.
ESCAPE
R/B
i
?
If Color blurring occurs on the picture or picture is out of focus,
press the CONV. for adjustment.
Upon completion of the adjustment, the color of “
“
changes to white
1
Press the CONV. button.
2
Press the R/B button, “Red” or “Blue” is displayed alternately.
3
To adjust horizontality. Adjust the horizontal line to “Yellow” (or “Cyan”) by
press the VOL+ or VOL– button.
4
To adjust verticality. Adjust the vertical line to “Yellow” (or “Cyan”) by press
the CH
▲ or CH▼ buttons.
5
Upon completion of the adjustment press the ESCAPE button.
☛
◆
In Arabian OSD, enter the convergence mode by
pressing the CONV. button on the remote control.
◆
Press the ESCAPE button to switch to the TV mode. And
then the TV set is automatically turned Off and back On.
(This process indicates that the micom automatically
reboots because the convergence data is saved in it.)
Convergence Adjustment
11318A#3 8/17/05 12:44 PM Page 32