Sanyo DC-MX30 - Manual (Page 4)

3
Note:
z
This unit will become warm when used for a long period of time. It’s a normal phenomenon.
Don’t worry about it.
z
This CD player includes microprocessors, which may malfunction as a result of external
electrical interference or noise. If the CD is not working properly, disconnect the power source
and then reconnect it.
z In case of malfunction due to electrostatic discharge or fast transient Burst ,reconnect of
power source may be required to resume normal operation.
z Do not install this equipment in a confined space, such as a bookcase or built-in cabinet.
HEARING IMPORTANT NOTE
Your hearing is important to you and to us so please take care when operating this equipment. It is
strongly recommended that you follow the listed guidelines in order to prevent possible damage to,
or loss of hearing.
Establish a safety sound lever
Over time your hearing will adapt to continuous load sounds and will give the impression that the
volume has in fact been reduced. What seems normal to you may in fact be harmful. To guard
against this, set the initial volume of the equipment to a low level.
Once you have established a comfortable listening level do not increase the sound level further.
CAUTION
CLASS 1 LASER PRODUCT
Operating the unit in a way other than specified herein, or
making adjustments to the unit may result in hazardous
radiation exposure
LASER SAFETY
This unit employs a laser. Only qualified service personnel should attempt repair.
WARNING: RISK OF INVISIBLE LASER RADIATION WHEN CD LID IS
OPEN OR INTERLOCKS FALL. AVOID DIRECT EXPOSURE TO THE
BEAM.
You can see the label on the
back of the unit
You can see this
label in the CD
compartment.