Safety labels, Be aware of the working environment, 50 feet – Shindaiwa 81646 User Manual

Page 4

Advertising
background image

4

4

Safety Labels

Figure 3

IMPORTANT!

Safety and Operation Information Labels: Make sure all information labels are undamaged

and readable. Immediately replace damaged or missing information labels. New labels are

available from your local authorized Shindaiwa dealer.

T261

This label indicates the minimum

distance between front handle and

rear grip per ANSI B175.3.

Be Aware of the Working Environment

Avoid long-term operation

in very hot or very cold

weather.

Make sure bystanders or observers

outside the 50-foot “danger zone”

wear eye protection.

Be extremely

careful of slip-

pery terrain,

especially during

rainy weather.

Always make sure the

appropriate cutting

attachment shield is

correctly installed.

If contact is made with a hard object,

stop the engine and inspect the cutting

attachment for damage.

When operating in rocky terrain or near electric

wires or fences, use extreme caution to avoid con-

tacting such items with the cutting attachment.

Be constantly alert for objects and debris that could be thrown

either from the rotating cutting attachment or bounced from a

hard surface.

Reduce the risk of

bystanders being struck

by flying debris. Make

sure no one is within 50

feet (15 meters)—that’s

about 16 paces—of an

operating attachment.

Figure 2

50

FEET

T261X

Advertising