SBC comm SBC-6020 - Manual (Page 20)


Once enabled, the automatic selection remains active until the next
manual selection or the next assignment.
1. Go to the “HS Settings” Menu. Choose “Switch Base”. The
display will show the current base’s number.
2. Choose “Automatic” by using the navigation key.
3. Press the OK key (Soft Key 1 ). The handset will start the search
for the base that has the strongest signal. Then, the handset will
show the number of the base with the strongest signal.
4. Press the OK key (Soft Key 1 ) to confirm.
G
et
tin
g
S
ta
rt
ed