Sun Microsystems MDS 9134 - Manual (Page 6)

4 Cisco MDS 9134 Multilayer Fabric Switch Hardware Release Notes • November 2007
Supported Hardware
This section lists the hardware that is compatible with the Cisco MDS 9134 switch.
Supported Switches and Directors
The Cisco MDS 9134 switch interoperates with the Cisco MDS 9000 family of
products. For more information, see Cisco’s interoperability support matrix located
at
http://www.cisco.com/ .
Supported Storage Platforms
The Cisco MDS 9134 switch is compatible with the following storage platforms:
■ Sun StorEdge™ 3510, 3511 FC arrays
■ Sun StorEdge 6120 and 6130 arrays
■ Sun StorageTek™ 6140 and 6540 arrays
■ Sun StorEdge 6320 system
■ Sun StorageTek FlexLine™ 380 array
■ Sun StorEdge Fibre Channel 9840A, 9840B, 9840C, 9940A, 9940B, LTO-2, LTO-3,
and SDLT 600 FC tape drives
■ Sun StorEdge 9910, 9960, 9970, 9980, 9985, 9990
■ Sun StorEdge FC420 FC-SCSI Bridge for L25 and L100 tape libraries with the SG-
XFCCARD2-C LVD SCSI to Fibre Channel Card Quantum or the SG-
XFC420CARD-MOD Fibre Channel / LVD Internal Bridge
■ FC Robots: L180, L700j, L1400M, SL500, L500
Supported HBAs
The Cisco MDS 9134 switch is compatible with the following HBAs:
■ SG-XPCIE2FC-EB4-Z
■ SG-XPCIE20FC-NEM-Z
■ SG-XPCI2FC-QF2 and SG-XPCI2FC-QF2-Z
■ SG-XPCI1FC-QF2