Samsung HT-BD3252 - Manual (Page 31)

31
ENG
●
CONNECTIONS
Case 2 : Connecting to a Wireless IP sharer
You can connect to network with a Wireless IP sharer. See page 54 for Wireless Network Setup.
This unit is compatible with the supplied Wireless LAN Adapter.
You can also use the wireless network by connecting the Wireless LAN Adapter Gender to the
Wireless LAN Adapter.
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended
for stable operation of the wireless network.)
Wireless LAN, in its nature, may cause interference, depending on the use condition (AP
performance, distance, obstacle, interference by other radio devices, etc).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
When applying the security key for the AP (wireless IP sharer), only the following is
supported.
Authentication Mode : WEP, WPAPSK, WPA2PSK
Encryption Type : WEP, TKIP, AES
•
•
M




1)
2)
FM ANT. HDMI IN
WIRELESS SPK
1 2
AUX IN VIDEO OUT
SPEAKERS OUT
Modem Port
Wireless IP sharer
Modem Cable
OR
Wireless LAN
Adapter
HT-BD3252A_XAA_0724-1.indd 31 HT-BD3252A_XAA_0724-1.indd 31 2009-07-24 5:27:20 2009-07-24 5:27:20