Range-testing the tq-3 radio system – SMC Networks T-Maxx 4910 User Manual

Page 20

Advertising
background image

The Traxxas TQ-3 Radio System

Range-Testing the TQ-3 Radio System

Before each running session with your T-Maxx, you should range-
test your radio system to ensure that it operates properly.

1. Turn on the radio system and check its operation as described

in the previous section (Using Your Radio System, pages 17- 19).

2. Have friend hold the model with the engine off.

3. Make sure your transmitter antenna is fully extended, and then

walk away from the model with the transmitter until you reach
the farthest distance you plan to operate the model.

4. Operate the controls on the transmitter once again to be sure

that the model responds correctly.

5. Do not attempt to operate the model if there is any problem

with the radio system or any external interference with your
radio signal at your location.

Don’t attempt to
operate your
T-Maxx if there are

any problems with your
radio system or radio
interference at your
location.

20

Advertising