Sony SLV-D980P - Manual (Page 54)

54 A/V Receiver hookup
B Use this hookup if your A/V receiver has a Dolby Digital, MPEG audio
or DTS* decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder
function of your AV amplifier (receiver). You are not able to enjoy the surround sound
effects of this player. You must make connections using
and .
* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Note
• After you have completed the connection, be sure to set “Dolby Digital” to “Dolby Digital”
and “DTS” to “On” in “AUDIO SETUP” menu (page 57). If your AV amplifier (receiver)
has an MPEG audio decoder function, set “MPEG” to “MPEG” in “AUDIO SETUP” menu
(page 57). Otherwise, no sound or a loud noise will come from the speakers.
B-1 B-2
B-2
R
L
VIDEO
AUDIO OPTICAL
DIGITAL
AUDIO OUT
COAXIAL
B-1
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
Subwoofer Centre
[Speakers]
DVD-VCR
[Speakers]
Rear (L)
to coaxial or optical
digital input
or
Coaxial digital
cord (not
supplied)
l: Signal flow
Stereo audio cord
(not supplied)
(red) (white)
to audio input
(white)
(red)
to OUT AUDIO L/R
and to DIGITAL AUDIO OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting