Sharp DV-AT4000 - Manual (Page 27)

27
DV-AT4000
D
V
D Oper
ation
- Us
eful oper
a
ti
o
n
-
" To play repeatedly (repeat play)
You can play a chapter (track) or a title repeatedly by specifying it during playback.
Caution:
After performing repeat play, be sure to press the button. Otherwise, the disc will
play continuously.
Notes:
! You may not be able to use this function with some discs.
! If you press another button during the repeat play, the playback may be canceled.
! When operating SVCD/VCD with the P.B.C. function, set the sequential play mode
to SEQ.2 (see page 30).
" To play the contents between the specified
points repeatedly (A-B repeat)
You can play the desired portion repeatedly by specifying it during playback.
Notes:
! A-B repeat play is disabled on some discs.
! A-B repeat play for DVD is possible only within a title.
! Perform A-B repeat play of an audio CD within a track.
! Some scenes in DVD may not allow A-B repeat play.
! When operating SVCD/VCD with the P.B.C. function, set the sequential play mode
to SEQ.2 (see page 30).
1
While the disc is playing, press the REPEAT button.
TV screen On the unit
Each time the button is pressed, the repeat play mode changes in the following order.
2
Select "Repeat Off" by pressing the REPEAT button repeatedly to
return to the normal playback.
Repeat Chapter
Repeat Chapter
Repeat Title
Repeat Off
REPEAT 1
REPEAT
Disappear
Repeat the currently
playing chapter.
Repeat the currently
playing title.
The normal playback
Repeat One
Repeat Dir
Repeat Disc
Repeat Off
REPEAT 1
REPEAT
REPEAT DISC
Disappear
Repeat the currently
playing
file .
Repeat the currently
playing
folder (directory) .
Repeat the currently
playing disc.
The normal playback
Repeat One
Repeat Disc
Repeat Off
REPEAT 1
REPEAT DISC
Disappear
Repeat the currently
playing track.
Repeat the currently
playing disc.
The normal playback
For SVCD/VCD/Audio CD, the mode changes as follows:
For MP3/JPEG discs, the mode changes as follows:
T
D
( )
( )
( )
( )
1
While the disc is playing, press the A-B button.
TV screen On the unit
This registers the start point (A).
2
Press the A-B button again.
This starts A-B repeat from the start point (A) to the end point (B).
3
Press the A-B button to return to the normal playback.
Repeat A - >
Repeat A - > B