Step 4: connecting the audio cords, Select a connection – Sony DVP-NS530 User Manual
Page 19
C:\Documents and
Settings\PC28\Desktop\3080594131 DVP-
NS530GB\SOURCE\01GB05GET-CEK.fm
master page=right
DVP-NS530/730P
3-080-594-13(1)
19
H
o
o
kups
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following
connections,
through .
* Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
** “DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Components to be connected
Connection
Your setup (example)
TV
• Surround effects: TVS DYNAMIC (page 50),
TVS WIDE (page 50)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 50)
or
MD deck/DAT deck
• Surround effects: TVS STANDARD (page 50).
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital, DTS**, or MPEG audio
decoder and 6 speakers
• Surround effects:
– Dolby Digital (5.1ch) (page 71)
– DTS (5.1ch) (page 71)
– MPEG audio (5.1 ch) (page 72)
A
D
A
B
C
D
,
continued
01GB01COV.book Page 19 Wednesday, April 27, 2005 11:37 AM