SmartDisk FotoChute Portable Hard Drive - Manual (Page 19)

9
To copy all files from a camera or other supported device, follow the
steps below.
1. Turn on FotoChute and connect the camera as described
above.
2. Press the OK/Copy button to begin copying all data from the
camera to the FotoChute hard drive. [Alternatively, you can
highlight Backup from the Main Menu, and then press
Select.]
When prompted on the display, press the OK/Copy button
again to confirm, or press the Left button to cancel. During
the data transfer the following display will indicate the
transmission activity.
When the copy process is complete, you will hear a beep and
the Main Menu will appear.
3. Return the Power Switch to the OFF position.
4. Disconnect the camera's USB cable from FotoChute.
A copy of your camera’s data will now be located in a new directory
on the FotoChute hard drive. The directory will be named using the
form
<DSKxxxxx>
where “xxxxx” is a 5-digit sequence number. The sequence number
begins from 00000 on each new date. All folders created on the same
date will be contained in a parent directory named based on the
current date, using the form
<mmddyy00>