Smeg DO10PSS - Manual (Page 7)

Instructions for the user
33
6. ELECTRONIC PROGRAMMER (ONLY ON SOME MODELS)
The programmer user instructions are valid only for the large oven.
LIST OF FUNCTIONS
MINUTE MINDER BUTTON
COOKING DURATION BUTTON
END-OF-COOKING BUTTON
DECREASE TIME BUTTON
INCREASE TIME BUTTON
6.1.0 Clock adjustment
When using the oven for the first time, or after a power failure, the display flashes regularly and
indicates
. Press the keys and at the same time the keys or : each single press
changes the time by 1 minute either up or down.
Before setting the programmer activate the desired function and temperature.
6.1.1 Semi automatic cooking
Use this setting for automatic oven switch-off at the end of cooking time. By pressing key , the
display lights up, showing ; keep the key pressed and at the same time, press keys or to
set the cooking time.
Release key
to start the programmed cooking time count. The display will now show the right time
together with symbols A and .
6.1.2 Automatic cooking
Use this setting to automatically start and stop the oven.
By pressing key
, the display lights up showing ; keep the key pressed and at the same
time, press keys or to set the cooking time.
By pressing key the sum of the right time + cooking time will appear; keep the key pressed and at
the same time, press keys or to regulate the end of cooking time.
Release key to start the programmed count and the display will show the right time together with
symbols A and .
After set-up, to see the cooking time remaining, press the key ; to see the end of cooking time press
the key .
Set-up with incoherent values is logically prevented (e.g. the contrast between a cooking time and a
longer period will not be accepted by the programmer).