Smeg DO10PSS - Manual (Page 8)

Instructions for the user
34
6.1.3 End of cooking
When cooking is over, the oven will automatically switch off and, at the same time, an intermittent
alarm will sound. After switching off the alarm, the display will once again show the right time together
with the symbol
, indicating that the oven has returned to manual operation mode.
6.1.4 Adjusting alarm volume
The acoustic alarm has three different settings. These can be operated, while the alarm is sounding,
by pressing key
.
6.1.5 Switching off the alarm
The alarm switches off automatically after seven minutes. It can be manually de-activated by pressing
the keys
and together.
6.1.6 Minute Counter
The programmer can also be used as a simple minute counter. By pressing key , the display shows
; keep the key pressed and at the same time press keys or . On releasing the key ,
programmed counting will begin and the display will show the current time and the symbol .
After set-up, to see the remaining time, press the key .
Use as a minute counter does not interrupt functioning of the oven at the end of the programmed time.
6.1.7 Cancellation of set data
Once the programme has been set, keep the key of the function to be cancelled pressed, while at the
same time
is reached by means of variation keys or . Time cancellation will be
considered as end-of-cooking time by the programmer.
6.1.8 Changing the set data
The cooking data entered can be changed at any time by keeping the function key pressed and at the
same time adjusting the keys
or .