Sony RDR-GX7 - Manual (Page 64)

64
Program Edit
To edit the Scene List, select a scene by pressing </
M/m/,, and then press ENTER. When the sub-
menu appears, select an edit option you want to apply
to the scene.
◆ To erase the scene
A Press M/m to select “Erase,” then press
ENTER.
B When the display asks for confirmation, press
</, to select “OK,” then press ENTER.
◆ To move the scene
A Press M/m to select “Move,” then press
ENTER.
The display for selecting the scene insertion point
appears.
B Press M/m to select the point, then press
ENTER.
The scene moves to the selected location.
◆ To reset the start or end of the scene
Press
M/m to select “Change IN” or “Change OUT,”
then press ENTER.
◆ To preview the scene
Press
M/m to select “Preview,” then press ENTER.
To cancel, press </M/m/, to select “Quit” in the
Scene List menu, then press ENTER.
j When you finish editing the Scene List, press
< / M/m/ , to select “OK,” then press
ENTER.
The display for entering a title name appears.
To enter a new name, select “Enter,” and follow the
explanations on page 18.
k To use the default name, press
< / , to select
“OK,” then press ENTER.
The default title name is fixed, and the display asks
whether to start recording. If you want to change the
recording mode, press
</, to move the cursor,
then press M/m to select the mode.
l Press
< / , to select “Start,” then press
ENTER.
The recorder starts recording the tape contents as
programmed.
To quit recording, press x REC STOP.
m When the recording is finished, press
ENTER to select “Close.”
The display returns to the DV Edit menu.
n Press RETURN repeatedly to turn off the
display.
Notes
• The disc may not be recorded as programmed if the tape’s time code is
not sequential or there are blanks between the recordings on the tape.
In this case, follow the instructions of “Recording From Equipment
Connected to the LINE IN Jacks” (page 71).
• The start and end points of a program may be different from what you
have set if the source DV/Digital8 format tape is in any of the
following conditions:
– Recording mode was changed during the recording.
– There is a blank space in the recorded portion of the tape.
• If you set the beginning of the tape as the IN point and the end point as
the OUT point, the IN and OUT points may change slightly during
dubbing.
• You cannot set a scene shorter than one second.
• This function may not work with certain digital video cameras. In this
case, follow the instructions of “Recording From Equipment
Connected to the LINE IN Jacks” (page 71).
SCENE LIST Total 1:23:30 Scenes 20
OK
Quit
Add
0:00:30-0:00:52
Duration 0:00:22
1
0:01:40-0:06:23
Duration 0:06:43
2
0:07:07-0:10:51
Duration 0:03:44
3
0:11:40-0:16:19
Duration 0:04:39
4
Title Name
Enter the title name.
DV11.10.2002 13:30 - 12.11.2002 16:46
OK Enter
SP
DV Dubbing
Change the recording mode if necessary.
Select "Start" to start dubbing.
Start Cancel