Setup the module card – Sanyo POA-MD17SDID User Manual
Page 3
Advertising
■
Setup the Module card
This module card connects to the terminal slot of the LCD projector.
1. First, remove a terminal equipped with a slot for setup.
Remove 2 screws and pull out the terminal from the projector.
2. Put a HD&SD-SDI module card in along the guide, and push in the projector.
Connect the socket of module card in the terminal socket of the projector firmly.
Fasten the module with two screws.
GUIDE
SOCKET
SCREW
MODULE CARD
SCREW
Advertising