Sanyo VPC E1292 - Manual (Page 40)

24 Capture Settings
The Capture Menu
English
P-Mode
The FOCUS ZONE setting allows you to select the number of zones the
camera will focus on when taking a photo. Use the UP/DOWN
navigation buttons to select from the options and press the OK button to
enter. 3 settings for focus zone are available:ï SELECTED AREA:
• MULTI-ZONE (default)
• CENTER
• SELECTED AREA
EV Compensation
The EV COMPENSATION menu allows you to adjust the exposure or
amount of light that enters the lens while capturing photos. Use this
feature to lighten or darken the image when the brightness between the
subject and background is not balanced or when the subject occupies
only a small part of the photograph. Use a positive (+) EV compensation
for spotlit subjects, especially against dark backgrounds or scenes with
low reflectivity, such as green or dark foliage.
Use the Up/Down navigation buttons to modify the value. This setting
can be modified from -2.0 to +2.0 in a 0.3/0.4 increment/decrement.
AEB
See “Using the AEB (Auto Exposure Bracketing) Function” on page 16 for more detailed information.
M-Burst Interval
The M-BURST INTERVAL setting allows you to adjust the burst
interval when the multi-burst function is enabled. Use the Up/Down
navigation buttons to select from the options. 3 settings for M-Burst
Interval are avaliable:
• 1/30 SEC (default)
• 1/15 SEC
• 1/7.5 SEC
MULTI-ZONE
CENTER
SELECTED AREA
FOCUS ZONE
EV COMPENSATION
+0.3EV
M-BURST INTERVAL
1/30 SEC
1/15 SEC
1/7.5 SEC