Sony MV-7101DS - Manual (Page 6)

6
Quick Review
You can play a DVD and other discs just after
reading Quick Review.
Playing a DVD
1
Press (OPEN) to open the display
monitor.
2
Press (POWER) to turn on the monitor.
The monitor turns on.
Tips
• The player turns on/off in conjunction with
the monitor. To turn off just the player,
press (POWER) on the remote commander or
on the player until the green light of the
POWER button on the player is turned off.
• If the player does not turn on in conjunction
with the monitor, press (POWER) on the
remote commander or on the player until the
green light of the POWER button on the
player lights up.
3
Press (INPUT) on the monitor repeatedly
to select “VIDEO 4.”
Each time you press (INPUT), the indication
changes in the following sequence:
VIDEO 1* c VIDEO 2* c VIDEO 3* c
VIDEO 4 c VIDEO 1*
* When connecting optional products, be sure
to select the proper input mode. For details,
refer to the connection diagram in the
supplied installation/connection manual.
4
Open the front panel of the player.
5
Insert the disc (labeled side up or the
surface you want to play down if the
disc is a DVD) into the player.
If a disc is already inserted, press u to start
playback.
Note
Even when the player is turned off, you can eject a
disc from the player, though you cannot insert a
disc.
Tip
Steps 3 to 5 are necessary only when you use this
system for the first time.
POWER
OPEN
INPUT