Sony KF-E42A10 - Manual (Page 29)

Usi
ng S
e
tt
in
gs
29 GB
“Iris” adjusts the contrast levels.
“Picture” increases picture contrast (the color becomes deeper), or decreases it (the color
becomes softer).
“Brightness” brightens or darkens the picture.
“Color” increases or decreases color intensity.
“Hue” increases or decreases the green tone.
1
Press to select the option.
2
Press M/m to set the level, then press .
Tip
“Hue” can only be adjusted for an NTSC color signal (e.g., U.S.A. video tapes).
Changes the color tone of the picture.
Press M/m to select one of the following, then press .
Cool: Gives the white colors a blue tint.
Neutral: Gives the white colors a neutral tint.
Warm1/Warm2: Gives the white colors a red tint. Warm2 is redder than Warm1.
Tip
“Warm1/Warm2” only appears and can be adjusted if “Picture Mode” is set to “Custom”.
Sharpens or softens the picture.
Press </, to set the level, then press .
Reduces the picture noise (snowy picture) in a weak broadcast signal.
Press M/m to select one of the following, then press .
Auto: Automatically reduces the picture noise.
High/Medium/Low: Modifies the effect of the noise reduction.
Off: Turns off the noise reduction feature.
Note
This option cannot be used in Twin Picture, Picture Freeze mode.
Selects the density adjustment according to the source.
Press M/m to select one of the following, then press .
High Density: Creates a high-resolution picture with four times density. Recommended for
high quality sources such as DVD.
Progressive: Recommended for moving pictures.
Off: Deactivates the DRC Mode.
Notes
• This option cannot be used in Twin Picture, Picture Freeze mode.
• This option cannot be used for 480p, 576p, 720p, and 1080i sources.
• This option cannot be used when “Game Mode” is “On” (page 39).
Iris/Picture/Brightness /Color/Hue
Color Temperature
Sharpness
Noise Reduction
DRC Mode
TV Video PC TV Video
TV Video PC
TV Video
TV Video
TV Video