Sanyo VHR-H690 - Manual (Page 5)

LOCATIONS OF CONTROLS AND INDICATORS
Front Panel
Reference pages are shown in square brackets.
1 POWER button
2 Cassette loading slot
3 REW (rewind) button [31]
This button is used both for rewind and reverse
picture search.
4 PAUSE/STILL button [25, 31]
œ Press this button in the record mode to
temporarily stop a recording (PAUSE).
œ Press this button in the playback mode to view a
still frame (STILL).
œ Press this button repeatedly in the still mode to
advance the picture one frame at a time.
5 FF (fast forward) button [31]
This button is used both for fast forward and
forward picture search.
6 REC. LIST button [27]
œ Press this button when a cassette tape is
loaded, the Rec. List Super menu appears.
7 STOP/EJECT button [3, 23]
8 PLAY button [23]
9 REC (record) button [25, 38]
F Indicator panel [5]
G Remote control sensor
H CHANNEL selection buttons ( l and j ) [15, 24, 38]
I Front-panel AUDIO/VIDEO input jacks [25, 40]
Connect the audio and video outputs from an
external unit (i.e. a video camera, second VCR) to
these jacks. To record the signals coming from the
external unit, press the INPUT button on the
remote control to display “L2” instead of a channel
number (see page 25). If only one audio jack is to
be used, connect it to the L (left) jack.
Auto A/V Selection [18]
There is no need to unplug the VCR from the TV to
view another video source on-screen. When the
VCR power is off and the output cable from an
external unit is connected to these front A/V input
jacks, the signal from the external unit is
automatically sent to the connected TV screen.
NOTE: The POWER, STOP/EJECT, REC,
PAUSE/STILL, FF, PLAY and REW buttons illuminate
according to each VCR mode.
9 7
2 1 3 5 4
I F G H 8
POWER
L-AUDIO-R
CHANNEL
VIDEO
AV INPUT a REC
c
PLAY
f
REW
e
FF
b STOP/iEJECT
h PAUSE/STILL
REC. LIST
6
SC4H/CA3 (VHR-H690 GB) Tue. Mar. 14/2000
4