Network setup(ml-3471nd only), Introduction, Via network administration programs – Samsung ML-3470D User Manual
Page 25: Via the control panel, Supported operating systems, Introduction supported operating systems, Network setup, Ml-3471nd only)
4
.1
<Network setup(ML-3471ND only)>
4
Network setup
(ML-3471ND only)
This chapter gives you step-by-step instructions for setting up your
printer for network connections.
This chapter includes:
•
•
•
•
•
•
•
Restoring the network configuration
•
Printing a network configuration page
Introduction
Once you have connected your printer to a network with an RJ-45
Ethernet cable, you can share the printer with other network users.
You need to set up the network protocols on the printer to use it as your
network printer. Protocols can be set up by the following two methods:
Via network administration programs
You can configure your printer’s print server settings and manage the
printer via the following programs that came with your printer:
• SyncThru™ Web Admin Service: Web-based printer management
solution for network administrators. SyncThru™ Web Admin
Service
provides you with an efficient way of manageing network
devices and lets you remotely monitor and troubleshoot network
machines from any sith with corporate internet access. Download this
program from
http://solution.samsungprinter.com
.
• SyncThru™ Web Service: A web server embedded to your network
print server, which allows you to configure the network parameters
necessary for the printer to connect to various network environments.
• SetIP: Utility program allowing you to select a network interface and
manually configure the IP addresses for use with the TCP/IP protocol.
See Using SetIP program on page 4.2.
Via the control panel
You can set up the following basic network parameters through the
printer’s control panel:
• Configure TCP/IP
• Configure EtherTalk
Supported operating systems
The following table shows the network environments supported by the
printer:
• TCP/IP: Transmission Control Protocol/Internet Protocol
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol
Item
Requirements
Network interface
• 10/100 Base-TX
• IEEE 802.11 b/g Wireless LAN (optional)
Network operating
system
• Windows 2000/XP/2003/2008/Vista/7/
Server 2008 R2
• Various Linux OS
• Macintosh OS 8.6 ~ 9.2 and 10.1 ~ 10.6
Network protocols
• TCP/IP on Windows
• EtherTalk
Dynamic addressing
server
• DHCP, BOOTP