Soleus Air Reflective Tower Heater MS-14R - Manual (Page 4)

4
PRODUCT DIAGRAM
Tip-Over Safety Switch
This heater is equipped with a tip-over safety switch located underneath the base of the heater. This switch
must be pressed inward for the heater to function properly. Some soft surfaces such as carpet may not be able
to fully press in this switch. For some soft surfaces, a hard flat object will need to be placed underneath the
heater for it to function properly. PLEASE DO NOT TAPE OR GLUE THIS SWITCH.
SAFETY FEATURES
SAFETY SWITCH
BOTTOM OF THE
HEATER
WARNING : This heater is for use on 120 volts. The
cord has a plug as shown in A. An adapter as shown in
C is available for connecting three-blade grounding-
type plugs to two-slot receptacles. The grounding lug
extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet
box. The adapter should not be used if a three-slot
grounded receptacle is available.
DO NOT DEFEAT THE SAFETY PURPOSE OF
THE GROUNDED PLUG.