Sony DR-BT22iK - Manual (Page 33)

DR-BT22iK [GB] 3-280-122-11(1) DR-BT22iK [GB] 3-280-122-11(1)

Calling while playing back music
The Bluetooth connection using HFP or HSP as well as A2DP is
necessary to make a call while playing back music.
For example, to make a call using a Bluetooth mobile phone while
listening to music on a Bluetooth compatible music player, the
headset needs to be connected to the mobile phone using HFP or
HSP.
Make a Bluetooth connection between the headset and the
device in use following the procedures outlined below.
1
Make a Bluetooth connection between the headset and the mobile
phone in use with HFP or HSP following the procedures outlined in
“Calling with headset” (page 29).
2
Make a Bluetooth connection between the transmitter and the
headset (page 18).
To make a call while playing back music
1
Press the multi function button while playing back music (page
32), or operate your Bluetooth mobile phone to make a telephone
call.
If no dial tone is heard on the headset, press and hold the multi
function button for about 2 seconds.
To receive a call while playing back music
When an incoming call arrives, the music pauses and the ring tone
is heard from the headset.
1
Press the multi function button and talk.
After finishing the call, press the multi function button. The
headset is switched back to music playback.
When no ring tone is heard even if an incoming call arrives
1
Stop music playback.
2
When ringing, press the multi function button and talk.