Sony FD Trinitron KV-28FX20U - Manual (Page 20)

18
Additional TV Features
The TV can be set to switch automatically to standby mode after a length of time chosen by you. You may set the time in 30
minute steps up to 4 hours.
Using the sleep timer
1. Press the MENU button on the remote control to display
the menu on the TV screen.
2. Press the DOWN arrow key on the remote control to
select the symbol on the TV screen then press the
RIGHT arrow key twice.
3. Press the LEFT or RIGHT arrow keys repeatedly until
the required amount of time delay appears on the screen.
4. Once the time delay has been selected, press the OK
button to enter.
5. Press the MENU button to remove the menu from the
TV screen.
One minute before standby, the display shown appears
on the screen.
Notes:When watching TV, press the button if you wish
to see the time remaining.
To return to normal operation from standby mode,
press the
button. /
PICTURE CONTROL
Contrast
Reset
FormatFormat
Picture Mode Personal . . . . . . . . .
Wide
PICTURE CONTROL
Contrast
Reset
FormatFormat Picture Mode Personal . . . . . . . . .
Wide
Sleep Timer Off
TIMER
Sleep Timer 1:00
TIMER
:59