SMC Networks TigerStack 100 1000BASE-X User Manual
Tigerstack 100, Stackable fast ethernet switch, Management guide
Advertising
Stackable Fast Ethernet Switch
◆ 24 100BASE-FX MT-RJ ports
◆ Optional 100BASE-FX or 1000BASE-X modules
◆ Optional stack module for linking up to four units
◆ 8.8 Gbps of aggregate switch bandwidth
◆ Support for redundant power unit
◆ Up to five port trunks per switch
◆ Port mirroring for non-intrusive analysis
◆ QoS support for two-level priority
◆ Full support for IEEE 802.1Q VLANs
◆ IP Multicasting with IGMP Snooping
◆ Manageable via console, Web, SNMP/RMON
TigerStack 100
Management Guide
SMC6924MT
Advertising
Table of contents
Document Outline
- Chapter 1 Switch Management
- Chapter 2 Using the System Configuration Program
- Login Screen
- Main Menu
- System Information Menu
- Management Setup Menu
- Configuring the Switch
- Configuring Port Parameters
- Viewing the Current Port Configuration
- Using the Spanning Tree Algorithm
- Viewing the Current Spanning Tree Information
- Using a Mirror Port for Analysis
- Configuring Port Trunks
- IGMP Multicast Filtering
- Configuring Broadcast Storm Control
- Configuring Bridge MIB Extensions
- Configuring Traffic Classes
- Configuring Virtual LANs
- Port Security Configuration
- Monitoring the Switch
- Resetting the System
- Logging Off the System
- Chapter 3 Web-Based Management
- Web-Based Configuration and Monitoring
- Navigating the Web Browser Interface
- Panel Display
- Main Menu
- System Information
- Switch Information
- IP Configuration
- SNMP Configuration
- Security Configuration
- Firmware Upgrade Options
- Configuration Save and Restore
- Address Table Configuration
- Spanning Tree Algorithm (STA)
- Configuring Bridge MIB Extensions
- Priority
- VLAN Management
- Configuring Virtual LANs
- IGMP Multicast Filtering
- Port Menus
- Using a Port Mirror for Analysis
- Port Trunk Configuration
- Port Statistics
- Chapter 4 Advanced Topics
- Appendix A Troubleshooting
- Appendix B Pin Assignments