Sony HVR-M10P - Manual (Page 3)

Switchable Recording and Playback –
HDV 1080i/DVCAM/DV
3 and 60i/50i
The HVR-M10 can switch between HDV 1080i, DVCAM and
DV recording, providing full flexibility to record in either
Standard or High Definition depending on production needs.
In addition, it can be switched between 60i and 50i modes
(NTSC and PAL), allowing for flexible productions without
the need for two separate VTRs with each standard.
3 The HVR-M10 supports DV SP mode only; no support for DV LP mode.
MAIN FEATURES
Compact, Unique Design
The HVR-M10 is compact, with
a small footprint that enables it
to be unobtrusively added to
existing work
environments. The HVR-M10 is
also unique – it can be placed
either horizontally or vertically.
In addition, it includes a control
panel lid and a cassette
compartment lid on its front.
REAR VIEW
5 4 2
Advanced Recording and Playback Capabilities
for Diverse Nonlinear Editing Needs
i.LINK
● ●
–
● ●
■
■
■
■
Analog
Composite
–
–
–
S-Video
–
–
–
Analog
Component
● ●
●
●
Analog
Composite
–
–
S-Video
–
–
Playback/
Down Conversion
Format
1080/60i
480/60p (16:9/4:3)
480/60i (16:9/4:3)
480/60i (16:9/4:3)
480/60i (4:3)
Recording
Format
1080/60i
480/60i (16:9)
480/60i (4:3)
Recording, Playback and Down-conversion Formats
uu
● ●
●
●
●
●
60i Mode
i.LINK
● ●
–
● ●
■
■
■
■
Input
Analog
Composite
–
–
–
S-Video
–
–
–
Output
Analog
Component
● ●
●
●
Analog
Composite
–
–
S-Video
–
–
Playback/
Down Conversion
Format
1080/50i
576/50p (16:9/4:3)
576/50i (16:9/4:3)
576/50i (16:9/4:3)
576/50i (4:3)
Recording
Format
1080/50i
576/50i (16:9)
576/50i (4:3)
uu
● ●
●
●
●
●
50i Mode
● ● : Available O : Switchable ■ ■ : Switchable (input) / available (output) u
Input Output
O: Available O : Switchable ■ ■ : Switchable (input) / available (output) u
Down-conversion Playback Capabilities
The HVR-M10 can convert material from 1080i down to 480i
and 576i, and output these video signals through its i.LINK
interface. In addition, these signals can also be output via
either analog component, composite, or S-video connectors.
This allows editing of recorded material with a nonlinear
editing system using current DV editing software as well as
recording SD signals to an external VTR, while simultaneously
recording HDV signals with the HVR-M10. The HVR-M10 can
also down-convert to 480p and 576p and output these sig-
nals through its analog component video connectors.
When down-converting these signals, the aspect ratio
displayed can be converted from 16:9 to 4:3. Display modes
can be selected from Squeeze, Letterbox or Edge crop.
i.LINK TM 4 Interface
The HVR-M10 is equipped with a 4-pin i.LINK interface.
This allows for on-cable digital transfer
5 of audio, video, and
command signals to a connected VTR or nonlinear editing
system in the HDV, DVCAM and DV formats.
4 i.LINK is a trademark of Sony Corporation used only to designate
that a product contains an IEEE 1394 connector. Not all products
with an i.LINK connector will necessarily communicate with each other.
For information on compatibility, operating conditions and proper connection,
please refer to the documentation supplied with any device with an i.LINK
connector. For information on devices that include an i.LINK connection, please
contact your nearest Sony office.
5 Insert and assemble editing using HDV material is not recommended with the
HVR-M10.
Opening New Opportunities for
Cost-effective HD Productions
– the HVR-M10 HDV 1080i VTR
Developed using the HDV 1080i specification of the HDV TM format,
the HVR-M10 Digital HD Videocassette Recorder provides HDV 1080i
recording and playback capabilities for a variety of roles such as a simple
playback viewer and a feeder for nonlinear editing systems.
It enables operators to record and play back 1080i HD signals, while
maintaining the DVCAM
TM /DV recording and playback capabilities provided
on current Sony DVCAM models.
What's more, the HVR-M10 also offers a down-conversion capability for its
1080i recordings. These features enable the HVR-M10 to be active immedi-
ately in current SD systems, while also providing a step-by-step migration
to the HD world – operators can continue to upload materials in DVCAM or
DV, and switch to HDV when the need arises, or upload in
HDV 1080i using the down-conversion capability as required.
In addition to basic VTR features inherited from the DSR-11, the HVR-M10
also provides easy monitoring capabilities, with a built-in, 3.5-inch
1 type
LCD monitor to display important information, such as the recorded image,
audio level, and set-up menu.
The HVR-M10 provides a highly powerful, yet cost-effective tool for
nonlinear editing system today and tomorrow.
1 Viewable area measured diagonally.
Control Panel Lid Open
Cassette Compartment Lid Open
Built-in, 16:9 Widescreen LCD Monitor
The HVR-M10 includes a 3.5-inch 6 type color LCD
monitor with a high resolution of approx. 250,000 pixels,
allowing operators to view the input source during
recording, or check the playback picture, in a widescreen
aspect ratio of 16:9. This large screen is also helpful
when setting menus or audio recording levels, as well as
for monitoring the VTR and audio status.
6 Viewable area measured diagonally.
Status Check
At the touch of a button, operators can display the
menu settings, mode of operation, time code and
audio level indications superimposed over the video on
the LCD monitor, allowing for easy status or settings
checks during recording, playback and feeding.
2-channel Independent Audio Record
Level Control with Audio Level Meter
Each input level for CH1 and CH2 can be independently
adjusted using two audio level controls on the control
panel and viewed with an audio level meter on the LCD
monitor. The audio
level meter can be
recalled quickly and
easily by a Status
Check function.
Time Code Preset
The time code can be preset using any number in H/M/S/F
(hours/minutes/seconds/frames) to record desired tape-
position information. The time-code mode can be select-
ed between “REC RUN” and “FREE RUN”.
In addition to the time code, user bits can also be set.
External Control
The HVR-M10 comes equipped with the
wireless Remote Commander
TM unit,
which provides control of basic
functions. In addition, the
HVR-M10 is equipped with
a LANC terminal.
Battery Operation
With the optional NP-F970 InfoLITHIUM TM Rechargeable
Battery Pack attached, the HVR-M10 can continuously
record in HDV mode for up to 545 minutes, or up to
630 minutes in DVCAM/DV mode with the LCD monitor
off. Battery information, such as the current charge level
and current remaining recording time, can be displayed
on the LCD monitor at the touch of a button.
Noiseless Design, with No Cooling Fan
The HVR-M10 requires no cooling fan, providing quiet
program-production environments.