Sdap nomad dryer with ap1 control, Start & stop conveying feature, Nomad ii – ad dryer (seven configurations) – Sterling SDAP User Manual
Page 2
SDAP Nomad Dryer with AP1 Control
Reference Manual (PN: 882.00281.00) for
Complete Operation and Installation Instructions
(Available online at www.sterlco.com)
Sterling
Part No:
682.92636.03
2900 S. 160
th
Street • New Berlin, WI 53151 USA Bulletin No: DH1-315.02
Tel. 262.641.8610 • Fax 262.641.8653
Start & Stop Conveying Feature
•
From Dryer status screen, press MAIN MENU. From the MAIN MENU screen, press
CONVEY STATUS.
•
This screen provides the operator with the current status of M1 (Machine Hopper 1), M2
(Machine Hopper 2), DH (Drying Hopper), MB (Machine Blower), and the HB (Hopper
Blower). Within this screen, the operator can access different variables in the conveying
system and START or STOP the process.
•
Momentarily pressing the M1, M2, DH, MB, or HB icons on the screen will darken or turn
them black. This indicates they are active in the conveying system.
•
To access the Operator Screens for the hoppers, press and hold the M1, M2, or DH icons
on the screen.
•
To get back to the DRYER STATUS screen, press the MAIN MENU button, then press the
DRYER STATUS button on the DRYER MENU.
NOMAD II – AD Dryer (Seven Configurations)
Convey to One Machine
Configuration "A"
ON
O
F
F
CONTROL
POWER
ON OFF
ALARM
HORN
M1
MB
Machine
1 Loader
Machine
Blower
Convey to Drying Hopper Only
Configuration "B"
ON
O
F
F
Drying Hopper
Loader
DH
HB
Hopper
Blower
ON
O
F
F
DH
HB
Hopper
Blower
Drying
Hopper
Loader
Convey to Drying Hopper With
Proportioning Valve
Configuration "BP"
ON
O
F
F
DH
M1
HB
Hopper
Blower
Drying Hopper
Loader
MB
Machine
Blower
Machine
1 Loader
Convey to Drying Hopper & One
Machine Configuration "C"
ON
O
F
F
M1
M2
HB
Hopper
Blower
Drying Hopper
Loader
MB
Machine
Blower
DH
Machine
1 Loader
Machine
2 Loader
Convey to Drying Hopper & Two
Machines Configuration "D"