SOYO AVRO3001 - Manual (Page 14)

11
enter the assigned IP address, subnet mask, and the gateway address here.
Figure 5-7
5.2.4 DNS
Most service providers provide a DNS server via DHCP or PPPoE for
speed and convenience. If you have a static IP address, or if there is a DNS
server that you would rather use, you need to specify the primary and
secondary IP address here. When the primary DNS does not work, the
system will automatically use the secondary DNS.
Figure 5-8
5.3 LAN Settings
You can enable DHCP to dynamically allocate IP addresses to each of your
PCs connected to the AVRO 3001 VoIP router. When DHCP server is
enabled, you need to enter the IP address range for the local hosts. The