Smeg CH300 - Manual (Page 5)

5
GB
Installation and start-up
Placement
For safety and operational reasons, the ap-
pliance must not be installed outdoors.
The appliance should be placed on a
stable, level surface in a dry, well-ventilated
room (max. 75% relative air humidity).
Never place the appliance close to sources
of heat such as cookers or radiators, and
avoid placing it in direct sunlight.
Room temperature
The climate class is stated on the name-
plate (see page 12). This specifies the
optimum room temperature.
Climate
class
Optimum room
temperature
SN +10 ºC à +32 ºC
N +16 ºC à +32 ºC
ST +18 ºC à +38 ºC
T +18 ºC à +43 ºC
If the room temperature is sub zero, the ap-
pliance will not function correctly.
Ventilation
It is important that the appliance be well
ventilated and that air can circulate unhin-
dered above, below and around it. Figure 2
illustrates how the necessary air circulation
can be ensured.
There must be at least 15 mm clearance
between the base of the appliance and the
floor.
IMPORTANT! There must be free access to
the ventilation grille (fig. 3).
100 mm
800 mm
20 mm
100 mm
CONTROL
SUPER MAX MIN
fig. 3
fig. 2