Sound Performance Lab 2269 - Manual (Page 5)

5
Rear Panel/Connections
RETURN CHANNELS 1 TO 4
These connectors provide the balanced RETURN signal from stereo channels 1
to 4 for connection to processor outputs. These signals are routed to the head-
phone amp and the line out according to the switch positions. Once again, the
connectors are wired according to the Tascam standard. The numbers on the
cables correspond to the Router return channels as follows:
Cable No. Return Channel Switch Position
1 Return 1 Left
2 Return 1 Right
3 Return 2 Left
4 Return 2 Right
5 Return 3 Left
6 Return 3 Right
7 Return 4 Left
8 Return 4 Right
SEND CHANNELS 9 TO 16
These connectors provide the balanced SEND signal from stereo channels 5 to
8 for connection to processor inputs. The numbers on the cables correspond
to the Router send channels as follows:
Cable No. Send Channel Switch Position
1 Send 5 Left
2 Send 5 Right
3 Send 6 Left
4 Send 6 Right
5 Send 7 Left
6 Send 7 Right
7 Send 8 Left
8 Send 8 Right
}
1
}
2
}
3
}
4
}
5
}
6
}
7
}
8