Sony CDP-XB920E - Manual (Page 11)

Playing CDs
11 EN
Playing CDs
When you directly locate a track numbered over 10
Press >10 first, then the corresponding number buttons.
To enter “0,” use button 10.
Example: To play track number 30
Press >10 first, then 3 and 10.
You can extend the playing time during Music Scan
Press MUSIC SCAN repeatedly until the playing time
you want (10, 20 or 30) appears in the display. Each time
you press the button, the playing time changes cyclically.
Note
If “– OVER –” appears in the display, the disc has reached the
end while you were pressing
). Press 0 or turn
≠ AMS ± counterclockwise to go back.
To locate
The next or
succeeding tracks
The current or
preceding tracks
A specific track
directly
By scanning each
track for 10 seconds
(Music Scan)
A point while
monitoring the sound
A point quickly by
observing the display
during pause
You need to
Turn ≠ AMS ± clockwise until
you find the track. When using the
remote, press
+ repeatedly until
you find the track.
Turn ≠ AMS ± counterclockwise
until you find the track. When using
the remote, press
= repeatedly until
you find the track.
Turn ≠ AMS ± until you find the
track number you want. When using
the remote, press the number button of
the track.
Press MUSIC SCAN. When you find
the track you want, press
· to start
playing the track.
Press ) (forward) or 0 (backward)
and hold down until you find the
point.
Press ) (forward) or 0 (backward)
and hold down until you find the
point. You will not hear the sound
during the operation.
Customising the Sound of Your
Music (Digital Filter Function)
By selecting the type of filter you want, you can adjust
the sound to match your system, your speakers, etc.
This player has four types of filters: “STD (Standard),”
“1,” “2” and “3.”
FILTER
Sound image
•
wide ranging
•
ample spatial representation
• clear
• smooth sound reproduction
• high clarity
•
strength
•
warm
• deep
Set the FILTER control to the digital filter type you
want. The display shows the digital filter type you
select.
If you change the type of digital filter during play, the
sound will be interrupted momentarily.
Notes
• The Digital Filter function primarily changes characteristics
outside the audible frequency. They cannot affect changes
within the audible frequency such as those provided by the
tone controls of the amplifier. Therefore, with certain
combinations of hardware and software, there may be no
noticeable effect after switching the filter.
• If you change the type of digital filter during Peak Search
(See page 18), the type of filter appears in the display when
Peak Search is finished.
Types of Digital Filter
STD (Standard)
1
2
3