Sony BRAVIA KDL-26V42xx - Manual (Page 28)

28 GB
Specifications
Display Unit
Power Requirements:
220–240 V AC, 50 Hz
Screen Size:
KDL-37xxxxx: 37 inches
KDL-32xxxxx: 32 inches
KDL-26xxxxx: 26 inches
Display Resolution:
1,366 dots (horizontal) × 768 lines (vertical)
Power Consumption*:
KDL-37S4xxx/ KDL-37U4xxx/ KDL-37V4xxx:
123 W (Home / Standard mode)
155 W (Shop / Vivid mode)
KDL-32S4xxx/ KDL-32U4xxx/ KDL-32V4xxx:
101 W (Home / Standard mode)
129 W (Shop / Vivid mode)
KDL-26S4xxx/ KDL-26U4xxx/ KDL-26V4xxx:
69 W (Home / Standard mode)
87 W (Shop / Vivid mode)
* For details about “Home mode” or “Shop mode” see
page 6.
Standby Power Consumption*:
KDL-37S4xxx/ KDL-37U4xxx/ KDL-37V4xxx:
0.6 W or less
KDL-32S4xxx/ KDL-26S4xxx/ KDL-32U4xxx/
KDL-26U4xxx/ KDL-32V4xxx/ KDL-26V4xxx:
0.7 W or less
* Specified standby power is reached after the TV
finishes necessary internal processes.
Dimensions (w × h × d):
KDL-37S4xxx/ KDL-37U4xxx:
Approx: 93.1 x 65.5 x 27.9 cm (with stand)
Approx: 93.1 x 60.9 x 11.0 cm (without stand)
KDL-37V4xxx:
Approx: 92.0 x 64.9 x 27.9 cm (with stand)
Approx: 92.0 x 61.0 x 11.0 cm (without stand)
KDL-32S4xxx/ KDL-32U4xxx:
Approx: 80.9 x 58.4 x 24.2 cm (with stand)
Approx: 80.9 x 54.2 x 9.9 cm (without stand)
KDL-32V4xxx:
Approx: 79.4 x 57.7 x 24.2 cm (with stand)
Approx: 79.4 x 54.0 x 9.9 cm (without stand)
KDL-26S4xxx/ KDL-26U4xxx:
Approx: 67.5 x 51.1 x 24.2 cm (with stand)
Approx: 67.5 x 46.6 x 9.7 cm (without stand)
KDL-26V4xxx:
Approx: 65.9 x 50.5 x 24.2 cm (with stand)
Approx: 65.9 x 46.6 x 9.5 cm (without stand)
Mass:
KDL-37S4xxx/ KDL-37U4xxx/ KDL-37V4xxx:
Approx: 20.5 kg (with stand)
Approx: 17.5 kg (without stand)
KDL-32S4xxx/ KDL-32U4xxx/ KDL-32V4xxx:
Approx: 15.5 kg (with stand)
Approx: 13.0 kg (without stand)
KDL-26S4xxx/ KDL-26U4xxx/ KDL-26V4xxx:
Approx: 12.5 kg (with stand)
Approx: 10.0 kg (without stand)
Panel System
LCD (Liquid Crystal Display) Panel
TV System
Analogue: Depending on your country/region selection:
B/G/H, D/K, L, I
Digital: DVB-T/DVB-C
Colour/Video System
Analogue: PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
Digital: MPEG-2 MP@ML
Aerial
75 ohm external terminal for VHF/UHF
Channel Coverage
Analogue: 48.25 - 855.25 MHz
Digital: VHF/UHF
Terminals
/ AV1
21-pin Scart connector (CENELEC standard)
including audio/video input, RGB input, and TV
audio/video output.
/ / AV2 (SMARTLINK)
21-pin Scart connector (CENELEC standard)
including audio/video input, RGB input, selectable
audio/video output, and SMARTLINK interface.
AV3 Video input (phono jack)
AV3 Audio input (phono jacks)
Audio output (Left/Right) (phono jacks)
HDMI IN 1, 2, 3
Video: 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
PC (see table)
Analogue audio (minijack):
500 mVrms, Impedance 47 kilohms
(HDMI IN 3 only)
COMPONENT IN
Supported formats: 1080i, 720p, 576p, 576i, 480p,
480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync
P
B
/C
B
: 0.7 Vp-p, 75 ohms
P
R
/C
R
: 0.7 Vp-p, 75 ohms
Audio input (phono jacks)
500 mVrms
Impedance: 47 kilo ohms
PC PC Input (15 Dsub) (see page 16)
G: 0.7 Vp-p, 75 ohms, non Sync on Green
B: 0.7 Vp-p, 75 ohms, non Sync on Green
R: 0.7 Vp-p, 75 ohms, non Sync on Green
HD: 1-5 Vp-p
VD: 1-5 Vp-p
PC audio input (minijack)
i Headphones jack
CAM (Conditional Access Module) slot
Additional Information
010COV.book Page 28 Friday, July 4, 2008 12:56 PM