Speco Technologies CVC-927PTZ User Manual
Speco technologies cvc-927ptz dome camera, Instruction manual
Advertising
Table of contents
Document Outline
- 1.1 Features1
- 2.1 Package Contents3
- 2.2 Basic Configuration Of Fastrax II E Dome Camera System4
- 2.3 Setting Dome Camera Termination5
- 2.4 Setting Dome Camera Address(Id)7
- 2.5 Setting Dome Camera Protocol8
- 2.6 Connection 9
- Connecting to the RS-4859
- Connecting to the Monitor9
- Connecting Alarms9
- Connecting the Power9
- 2.7 Getting Started9
- Chapter 3 — Program and Operation11
- 3.1 Selecting Dome Camera11
- 3.2 Accessing On-Screen Menu Utility11
- 3.3 How To Control On-Screen Menu Utility12
- 3.4 Auto Scan12
- 3.5 Preset14
- 3.6 Shortcut Preset Program15
- 3.7 Tour 15
- 3.8 Pattern17
- 3.9 Alarm18
- 3.10 Area Title18
- 3.11 Privacy Zone19
- 3.12 Camera –HID2404SXEXXX MODEL 21
- Focus Control21
- WB(White Balance) Control22
- AE Control22
- Line Lock Control23
- Night Shot Menu23
- 3.13 Camera –HID2404HCEXXX MODEL24
- Focus Control24
- WB(White Balance) Control24
- AE Control25
- Line Lock Control26
- Night Shot Menu26
- 3.14 Dome Setup27
- Home Function Setup27
- OSD Display Setup28
- View Direction28
- Dome OSD Display28
- Area Display28
- View Angle Setup28
- Panning Range29
- Flip29
- Tilt Over Angle29
- Initialize Data30
- Origin Offset30
- Dome Reset30
- System Information30
- 1.1 Features
- 2.1 Package Contents
- 2.2 Basic Configuration of Fastrax II E Dome Camera System.
- 2.3 Setting Dome Camera Termination
- 2.4 Setting Dome Camera Address (ID)
- 2.5 Setting Dome Camera Protocol
- 2.6 Connections
- 2.7 Getting Started
- 3.1 Dome Camera Selection
- 3.2 Accessing the On-Screen Menu Utility
- 3.3 How to control the On-Screen Menu Utility
- 3.6 Shortcut of Preset Program.
- 3.7 Tour (THIRD ITEM OF THE MAIN MENU / SHORTCUT: TOUR)
-
- •FOCUS CONTROL
- • WB \(white balance\) CONTROL
- • AE CONTROL
- • LINE LOCK CONTROL
- • NIGHT SHOT MENU
- • FOCUS CONTROL
- • WB \(white balance\) CONTROL
- • AE CONTROL
- • LINE LOCK CONTROL
- • NIGHT SHOT MENU
- • HOME FUNCTION SETUP
- • OSD DISPLAY
- • VIEW DIRECTION
- • DOME OSD DISPLAY
- • AREA DISPLAY
- VIEW ANGLE SETUP
- • PANNING RANGE
- • FLIP
- • TILT OVER ANGLE
- • INITIALIZE DATA
- • ORIGIN OFFSET
- • DOME RESET
- • SYSTEM INFORMATION
-
- Alarm Actions
- Areas
- Automatic Gain Control (AGC)
- On-screen Menu
- Flip
- Home Position
- Input Alarm
- Input Devices
- IR Mode
- Line Lock
- Name Information
- Normal Input State
- North Position
- Low Shutter
- Pattern
- Preset
- Privacy Zones
- Shutter Limit
- Vector Scan
- WDR
- White balance