Samsung BN68-01415A-00 - Manual (Page 47)

english - 
auto Wall-mount (Sold separately)
once the auto wall mount is installed, your tV’s position can be easily adjusted.
entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
The Auto Wall-Mount screen is displayed.
If the Auto Wall-Mount screen is not displayed when
clicking on a direction button while watching your TV, use
the menu to display that screen.
• Press the menu butt on to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
enter button.
• Press the ▲ or ▼ button to select “Auto Wall-Mount”, then
press the enter button.
remembering the Position
. Adjust to the desired position using the ▲,▼,◄,► buttons.
If you press an arrow button when no OSD is displayed on
the TV screen, the Adjustment screen appears.
Press the InFo button to reset. Press the ◄ or ► button to
select “Yes”, then press the enter button.
The position is initialized to the default setting.
. Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position 1, Position 2 or Position 3 in order to save the current
position.
To not save the current position, press the return button.
When selecting a save mode, you cannot use the Colour
buttons.
. Press the enter button to save.
When Position1 is selected, the message "Current position
saved as Position1" is displayed.
. Press the enter button.
The saved Position appears on the left side of the OSD.
➣
➣
➣
➣
➣
➣
➣
➣
tV Setup
Plug & Play 
language : english 
time 
auto Wall-mount 
melody : off 
entertainment : off 
energy Saving : off 
PIP 
move enter return
Save
Select a mode to Save.
Position1
Position
Position
adjust enter return
auto Wall-mount
Position1
adjust Save Center InFo
Position 1  
tV rear Panel
auto Wall-mount
SerVICe Cable (not supplied)
BN68-01415A-00Eng-0228.indd 45 2008-02-28 �� 4:16:41