Introduction, Package contents, System requirements – SonicWALL Wireless Card User Manual
Page 2: Product registration
Page 1
SonicWALL Long Range Dual Band
Wireless Card User’s Guide
Table 1: Version History
This document describes SonicWALL Long Range Dual Band Wireless Card package contents and step-
by-step procedures to configure your wireless card, setup the SonicWALL Client Utility, and connect to
the network.
This document contains the following sections:
•
•
“Installing the Drivers and SonicWALL Client Utility” on page 4
•
“Using the SonicWALL Client Utility” on page 9
•
•
Introduction
The SonicWALL Long Range Dual Band Wireless Card is a PC Card that fits in any 32-bit Cardbus PC
Card Standard V7.1 Type II slot. The Wireless Card has an LED indicator and an integrated built-in
diversity antenna.
Package Contents
•
One wireless card
•
One installation CD
•
One Quick Start Installation Guide document
System Requirements
The following are the minimum system requirements in order to use the SonicWALL Long Range Dual
Band Wireless Card.
•
PC/AT compatible computer with a 32-bit Cardbus PC Card Standard V7.1 Type II slot
•
Windows 98SE/ME/2000/XP operating system
•
300 MHz or higher processor
•
32 MB or greater memory
Product Registration
Registering your SonicWALL Long Range Wireless Cards at mySonicWALL.com
(www.mysonicwall.com) allows you to receive any new driver updates. Your SonicWALL wireless security
appliance must be registered before registering your SonicWALL Long Range Dual Band Wireless Cards.
Version
Date
Notes
1
April 20, 2004
This document was created.
2
April 20, 2004
Added Windows Wizard diagrams.
3
April 29, 2004
Incorporated technical review comments.
4
May 6, 2004
Updated SonicWALL Client Utility diagrams.
5
May 17, 2004
Incorporated final technical review comments.